航安全性監測模擬器（英文）.jpg)
Provide continuous and reliable testing support for users in harsh outdoor environments, with a comprehensive three defense design that can cope with various extreme conditions. Optional built-in maximum 30 watt power amplifier, fully charged state can meet 8 hours of long-term battery life.
NIF2000S is an outdoor portable navigation suppression interference device that can simulate GNSS full frequency band dual channel suppression interference signals, including the S-band. It covers up to 8 types of interference styles, including single tone interference, sweep interference, amplitude modulation interference, frequency modulation interference, pulse interference, white noise interference, digital modulation interference, and combination interference.
The NIF2000S adopts an integrated structural design, with a 420 × three hundred and thirty × A 130mm space is integrated with a long-lasting lithium battery and high-power power amplifier, allowing a single machine to operate continuously for 8 hours. The entire machine achieves IP65 waterproof and dustproof level, reliable operation in high and low temperature environments, high-strength vibration and drop protection, and can adapt to various extreme and complex working environments in the wild.
為外場嚴酷環境下的用戶提供持續可靠的測試保障，全面的三防設計能夠應對各類極端條件，可選內置最大30瓦功放，滿電狀態可滿足8小時長效續航。
The scripted editing ability of the testing plan planning function and testing process allows users to plan and design the testing plan according to the testing requirements before the experiment, and edit the testing process. Users can manage and configure the testing scenarios and processes according to the testing needs of different receivers and different testing tasks and objectives, and use them as different testing templates.
Perform manual or batch Test automation based on test scenarios and test processes, and have one click Test automation function for user terminal technical indicators.
After each test project is completed, it can automatically analyze and evaluate the test data and generate test reports, with the function of automatic analysis and evaluation of user terminal technical indicators.
Multiple testing and evaluation modes are available, including automatic, manual, and single mode.
Real time analysis and evaluation of test data, capable of analyzing and comparing test data in real time, completing functional and performance indicators such as pseudo range measurement accuracy, positioning accuracy, channel consistency, bit error rate, etc., and automatically generating data processing reports.
The real-time analysis and evaluation function of test data allows for knowing the statistical results of indicators without waiting until the end of the test, facilitating the timely termination of problematic receiver tests and saving testing time.
Comprehensive display function: It can comprehensively display various information such as work status, simulation scenarios, positioning results, data processing reports, etc. in various forms such as data, tables, graphics, etc.
Database management function, which can automatically classify, store, query, and count simulation and test data, and has automatic data storage and retrieval functions.
Equipped with automatic evaluation of test results and automatic generation, printing, and export of test reports.設備主機、電池采用一體化密封艙設計，IP65級防塵防水。內置大容量鋰電池，可脫離電源在戶外環境連續工作8小時。選配內置或外置功放，以滿足復雜多樣的測試環境與應用場景要求。
|
干擾信號頻段 |
||
|
通道1 |
固定頻段 |
B3、L2、G2 |
|
通道2 |
可選頻段1 |
B1、L1、G1、E1 |
|
|
可選頻段2 |
B2、L5、E5 |
|
|
可選頻段3 |
S |
|
壓制干擾類型 |
||
|
壓制干擾類型 |
單音、掃頻、調幅、調頻、脈沖、白噪聲、數字調制、組合干擾等 |
|
|
最大干擾帶寬 |
≥20MHz |
|
|
信號輸出功率 |
||
|
輸出功率范圍 |
-50dBm~+5dBm（可選內置或外置功放模塊） |
|
|
功率調節步進 |
0.5dB |
|
|
功率準確度 |
≤0.7dB |
|
|
信號質量 |
||
|
雜散抑制 |
≤-40dBc |
|
|
諧波抑制 |
≤-40dBc |
|
|
物理特性 |
||
|
整機尺寸 |
≤420mm（長）×330mm（寬）×130mm（高） |
|
|
整機重量 |
≤12kg |
|
|
電源功耗 |
||
|
整機輸入電壓 |
19～24V |
|
|
整機充電功率 |
≤160W |
|
|
整機工作功率 |
≤200W |
|
|
續航時間 |
≤8h（內置電池） |
|
|
工作環境 |
||
|
工作溫度 |
-15℃～+40℃ |
|
|
存儲溫度 |
-40℃～+60℃ |
|
|
防護等級 |
IP65 |
|
| 仿真信號規模 | |
| 衛星通道數量 | |
| 多徑信號數量 | |
| 信號精度 | |
| 偽距精度 | |
| 偽距變化率精度 | |
| 通道一致性 | |
| 信號動態 | |
| 仿真高程 | |
| 相對速度 | |
| 相對加速度 | |
| 相對加加速度 | |
| 外部軌跡實時性 | |
| 信號延遲 | |
| 數據更新率 | |
| 信號質量 | |
| 雜波抑制 | |
| 諧波抑制 | |
| 信號電平 | |
| 電平調節范圍 | |
| 電平調節步進 | |
| 物理和電氣性能 | |
| 整機尺寸 | |
| 整機重量 | |
| 電源、功耗 | |
Need help or have a problem?
Contact Us